Home »
Our Products » Cement, Lime, Plaster & Mortar Testing
Machines
Soil Testing Machines
Our Soil Testing Machines will never let you down in
terms of quality, durability and performance. Our range includes: Constant
Pressure System, Compaction Test Apparatus Cone Penetrometer Method,
Consolidation Apparatus and other durable machines.
Direct Shear
IS: 2720 (Part 13), ASTM D 3080
The Direct Shear test is carried out with an apparatus consisting of a
square or circular box divided into two halves. The specimen, contained in
the box, is subjected to a constant normal load while an increasing
horizontal force is applied to one of the sections of the shear box. This
force causes a shear failure along the junction between the box sections.
The shear force and the normal load are measured directly. The rate of
strain is adjusted by the speed of the horizontal force applied. The loading
unit has V-strips on which the shear box housing rests.The precalibrated
load yoke with direct and lever system for applying normal load of 8 kg/cm2
capacity, fixtures, for proving ring brackets, for holding consolidation and
strain dial gauges and lead screw for application of shear stress
ILE offers the following models :
IL - 508
Direct Shear apparatus, 2 KN IS: 11229 - 1985, 2720
(Part 13) - 1986
 |
| Type of Shear Measurement : |
|
| Direct/Residual Operation |
Manual |
| Specimen Size |
60 x 60 x 25 mm |
|
|
IL - 508.1
Direct Shear apparatus, 2 KN IS: 11229 - 1985, 2720
(Part 13) - 1986
|
| Type of Shear Measurement : |
|
| Direct/Residual Operation |
Motorised |
| Rates of Strain (mm/min) |
1.25 |
| Specimen Size |
60 x 60 x 25 mm |
| Power Specifications |
230 V, 50 Hz, Single Phase, AC supply |
|
|
IL - 508.1D
Direct Shear apparatus, 2 KN IS: 11229 - 1985, 2720
(Part 13) - 1986
|
| Type of Shear Measurement : |
|
| Direct/Residual Operation |
Motorised |
| Read Out |
Digital |
| Rates of Strain (mm/min) |
1.25, Specimen Size: 60 x 60 x 25 mm |
| Power Specifications |
230 V, 50 Hz, Single Phase, AC supply |
|
|
IL - 508.2
Direct Shear apparatus, 2 KN , 12 Speed IS: 11229 -
1985, 2720 (Part 13) - 1986
|
| Type of Shear Measurement : |
|
| Direct/Residual Operation |
Motorised |
| Rates of Strain (mm/min) |
1.25, 0.625, 0.25, 0.125, 0.05, 0.025, 0.01,
0.005, 0.002, 0.001, 0.0004, 0.0002 |
| Specimen Size |
60 x 60 x 25 mm |
| Power Specifications |
230 V, 50 Hz, Single Phase, AC supply |
|
|
IL - 508.2D
Direct Shear apparatus, 2 KN IS: 11229 - 1985, 2720
(Part 13) - 1986
|
| Type of Shear Measurement : |
|
| Direct/Residual Operation |
Motorised |
| Rates of Strain (mm/min) |
1.25, 0.625, 0.25, 0.125, 0.05, 0.025, 0.01,
0.005, 0.002, 0.001, 0.0004, 0.0002 |
| Specimen Size |
60 x 60 x 25 mm |
| Power Specifications |
230 V, 50 Hz, Single Phase, AC supply |
|
|
The apparatus consists of :
|
| IL - 508001 |
Shear Box Assembly 1 Set |
| IL - 508002 |
Halves of the Shear Box Set of 2 |
| IL - 508003 |
Plane Gripper Plate 1 Pair |
| IL - 508004 |
Perforated Gripper Plate 1 Pair |
| Il - 508005 |
Porous Stone 1 Pair |
| IL - 508006 |
Top Loading Pad 1 No. |
| IL - 508007 |
Base Plate 1 No. |
| IL - 508008 |
Shear Box Housing, with two Ball Roller Strips 1
No. |
| IL- 508009 |
Specimen Cutter 1 No. |
|
|
IL - 509
Large Direct Shear Apparatus, Motorised, 30 kN
(3,000 kgf) IS: 2720 (Section 1 - Part 39)-1977, IS: 11593-1986
For testing sands, gravel, gravely clays and clay gravels for use in rolled
fill embankments.
Type of Shear Measurement :
- Direct Operation: Motorised
- Rates of Strain (mm/min): 72 speeds Ranging from 0.0014 to
10.16mm/min
- Specimen Size: 30 x 30 x 15 cm
- Change gears: 12
- Shear Load capacity: 30 kN
- Vertical load capacity: 300 kN/m2
Power Specifications: 220 V, 50 Hz, 1 phase, AC supply
IL - 510
Large Direct Shear Apparatus, Motorised, 50 kN
(5,000 kgf) IS: 2720 (Section 1 - Part 39)-1977, IS: 11593-1986
For testing sands, gravel, gravely clays and clay gravels for use in rolled
fill embankments.
Type of Shear Measurement :
- Direct Operation: Motorised
- Rates of Strain (mm/min): 72 speeds Ranging from 0.0014 to
10.16mm/min
- Specimen Size: 30 x 30 x 15 cm
- Change gears: 12
- Shear Load capacity: 50 kN
- Vertical load capacity: 500 kN/m2
- Net weight: 990 kg
- Power Specifications: 220 V, 50 Hz, 1 phase, AC supply
IL - 510D
Large Direct Shear Apparatus, Motorised, 50 kN
(5,000 kgf) IS: 2720 (Section 1 - Part 39)-1977, IS: 11593-1986
For testing sands, gravel, gravely clays and clay gravels for use in rolled
fill embankments.
Type of Shear Measurement :
- Direct Operation: Motorised
- Rates of Strain (mm/min): 72 speeds Ranging from 0.0014 to
10.16mm/min
- Specimen Size: 30 x 30 x 15 cm
- Change gears: 12
- Shear Load capacity: 50 kN
- Vertical load capacity: 500 kN/m2
- Net weight: 990 kg
- Power Specifications: 220 V, 50 Hz, 1 phase, AC supply
The above apparatus consists of :
|
| IL - 510001 |
Shear Box Assembly 1 No. |
| IL - 510002 |
Plane Gripper Plate 2 Nos. |
| IL - 510003 |
Perforated Gripper Plate 2 Nos. |
| IL - 510004 |
Perforated Spacer Plate 2 Nos. |
| IL - 510005 |
Base Plate 1 No. |
| IL - 510006 |
Top Loading Pad 1 No. |
| IL - 510007 |
Shear Box Housing, with two Ball Roller |
|
|
