IS:269-1958, BS:12, ASTM C190 and C307
Briquette Mould made of Brass.
IL - 108.1
Briquette Mould, Single Gang
IL - 108.2
Briquette Mould, Three Gang
IL - 108001
Base Plate, M. Steel, for Briquette mould
IL - 110
Capping Set For Cylindrical Mould
IS: 516, BS: 1881, ASTM C31 ASTM C617
While casting the cylindrical moulds both side of
mould should be flat and parallel when conducting a compressive strength
test. These capping sets are for use in the field and in the laboratory.
IL - 110.1
Capping Set, Vertical, for Capping 100 mm dia x 200 mm high Cylinders
IL - 110.2
Capping Set, Vertical, for Capping 150 mm dia x 300 mm high Cylinders
IL - 110.3
Capping Set, Horizontal, for Capping 100 mm dia x 200 mm high Cylinders
IL - 110.4
Capping Set, Horizontal, for Capping 150 mm dia x 300 mm high Cylinders
Accessory
IL -110001
Capping compound powder
IL - 110002
Melting pot for Capping compound, 1 Liter Capacity, Working Temp. 150 C
IL - 110003
Bowl, Metallic bowl for carrying the capping compound
IL - 110004
Ladle, Metallic ladle for pouring the molten capping compound into the
grooves between the cylinder and the capping plate.
Concrete Mixer
These concrete mixers are ideal for use in
laboratory.Power supply: 220 V, 50 Hz, and single phase
IL - 111.1
Concrete Mixer, Capacity 1 cubic feet
IL - 111.2
Concrete Mixer, Capacity 150 liter
IL - 111.2
Concrete Mixer, Capacity 40 liter (Pan Type)
IS: 10510-1983 IS: 1199, ASTM C - 124, AASHO T
120, 126
Consists of a vibrating table, specimen pot, slump cone, and graduated rod.
Suitable for operation on 220 V, 1 phase, 50 Hz, AC Supply
IS: 5515
A useful tool for workability determination of concrete mixes of very low
workability such as those normally used with Concrete, compacted by
Vibration. Concrete mix having maximum size of aggregate exceeding 38 mm can
be tested for workability. Apparatus is complete with hoppers and receiver
assembly. IL - 113001
Tamping rod and plasterer's trowels.
Demountable Mechanical Strain Gauges
Suitable for use on a loading member under adverse conditions
Demountable measuring head
Portable
High accuracy
Reference tester incorporated
These are designed for gauge lengths of 100, 150 and 200 mm of the
reference pins. Supplied complete with two standard bars and a dial gauge
0.002 mm x 5 mm fixed on the meter, in a wooden case.
IL - 117
Demountable Mechanical Strain Gauge, 100 mm. IL - 117001
Demountable Mechanical Strain Gauge, 150 mm. IL - 117002
Demountable Mechanical Strain Gauge, 200 mm.
