Air Entrainment Meter Manufacturers | Air Permeability Apparatus Blaine Type Manufacturers | Beam Moulds Manufacturer | Cube Moulds Manufacturers

Air Entrainment
IS:1199, IS:9799-1981, IS:10079. BS-1881

It consists of a pressure-tight flanged cylindrical measuring bowl, fitted with a removable flanged and a conical cover assembly with a seal in-between. The conical cover has an air valve and a petcock for bleeding off the water. A cylindrical standpipe, which is graduated in percent air content, is fixed to the conical cover assembly. Required pressure is applied to the specimen with the help of a pressure bulb. The recommended limits specified for the air content are between 3% and 6.5%.Each apparatus is supplied complete with a calibrating cylinder, pressure gauge, funnel, trowel and tamping bar.

IL - 101
Air Entrainment Meter,
Capacity 0.005 m3 (5 liters), suitable for aggregate size up to 38mm.

IL - 102
Air Entrainment Meter,
Capacity 0.01 m3 (10 liters), suitable for aggregate size up to 75 mm

IL - 103
Air Entrainment Meter,
Capacity 0.1 m3 (100 liters), suitable for aggregate size up to 150 mm. with Foot Pump Assembly in place of pressure Bulb.

To determine the fineness of cements, pozzolanas and other powdery materials, various international specifications recommend the use of "specific area" method. In the methods described below, air permeability methods are used to determine the specific surface as total surface area in cm²/g of material.

Air Permeability Apparatus Blaine Type
IS: 5516 IS: 1727, IS: 4031, IS: 4825, ASTM C204, BS: 4359 Part 2

It is a variable flow type air permeability apparatus.The apparatus comprises one each of :

Permeability Cell, 12.5 mm ID
'U' Tube Manometer, mounted on stand
Perforated Metal Disc
Plunger
Rubber Stopper
Rubber Tube, 20 cm long
Filter Paper Discs (Twelve Nos.)
Dibutylphthalate Liquid

IS: 10086, IS: 516, BS: 1881, ASTM C192 and ASTM C31
ILE make moulds are of high quality metal and intensive care has been taken while surface furnish. ILE offers Cube Moulds, Cylindrical Moulds and Beam Moulds of various sizes as listed below.

Beam Moulds

These moulds are made of cast iron and are supplied complete with base plate. For conducting the flexural strength test of concrete.

IL - 105.1
Beam Mould, 100 mm x 100 mm x 500 mm size
IL - 105.2
Beam Mould, 150 mm x 150 mm x 700 mm size
IL - 105.3
Beam Mould, 150 mm x 150 mm x 750 mm size
Optional Accessory
IL - 105001
Tamping Bar, Steel, 25 mm x 25 mm square ramming face, 400 mm long, 2kg in weight. for use with Beam Moulds

IL-106
Cube Moulds

These moulds are made of cast iron and are supplied complete with base plate. For conducting the compression test of concrete.

IL - 106.1
Cube Mould, Cast Iron, 50 mm
IL - 106.2
Cube Mould, Cast Iron, 70.6mm,for mortar mixes for vibrating machine
IL - 106.3
Cube Mould, Cast Iron, 100 mm, 8 kg
IL - 106.4
Cube Mould, Cast Iron, 100 mm, 10 kg
IL - 106.5
Cube Mould, Cast Iron, 150 mm, 8 Kg
IL - 106.6
Cube Mould, Cast Iron, 150 mm, 10 Kg
IL - 106.7
Cube Mould, Cast Iron, 150 mm, 14 Kg
IL - 106.8
Cube Mould, Cast Iron, 150 mm, 18 Kg
IL - 106.9
Cube Mould, Cast Iron, 200 mm
IL - 106.10
Cube Mould, Cast Iron, 300 mm
IL - 106.11
Cube mould, Steel , 300mm

Concrete Testing Machines